铝滑轨产品
Product of aluminum-alloy slide rails  |
推拉窗效果图
The effective skethch of trundle-and hual window
 |
塑钢推拉窗铝滑轨常用规格：
Common specifications of aluminum slide rail for plastic-steel sliding
windows
|
* 安装方式：
窗友铝滑轨均采用优质铝锭，由热压延设备经模具挤出成各种规格，经表面防腐氧化处理后的塑钢推拉门窗专用（门）窗框滑轨。正确的安装方法是将长度为6米的铝滑轨按要求尺寸，用钢材切割锯下好料，将铝滑轨下开口处的一端先预固定在型材框内的铝滑轨嵌入槽处，然后用木榔头，由一端向另一端轻轻地向下敲入型材槽内即可。
|
* Assembly Method：
As special (door) window sash slide rails for plastic-steel sliding
doors and windows, CHUANGYOU aluminum-alloy slide rails are made to
specified sizes through die extrusion from aluminum ingots on hot
rolling equipment and oxidized on the surface for corrosion protection.
In order to make correct assembly, the aluminum-alloy slide rail in
6 m length shall be cut to specified dimension with a slitting saw
for steel. Then the end of the aluminum slide rail at the lower opening
shall be pre-fixed into the profile frame section at the insertion
slot that is designed to contain the aluminum slide rail. Now, it
can be slightly hit with a wooden hammer into the profile channel
from one end to the opposite end.
特别提示：
(1) 安装时严禁用铁榔头猛击铝滑轨表面，这样会导致滑轨变形。
(2) 铝滑轨下料尺寸要精确，避免造成缺角现象，影响推拉效果。
Special caution:
(1) Never hit hard on the surface of the aluminum slide rail with
steel hammer.Otherwise,the slide rail will suffer from deformation.
(2) The aluminum slide rail should be cut to specified dimension
precisely to avoid unfilled corner and poor slideing performance.
|
推拉窗铝滑轨安装方式示意图
The installation sketch of slide track on trundle-and-hual window
 |
铝滑轨产品实样图：
Actual patterns of aluminum slide rails:
 |
* “窗友”铝滑轨具有良好的耐磨性，几何尺寸稳定，表面光洁度好，窗扇推拉轻松灵活。
* CHUANGYOU aluminum slide rails are
manufactured with good resistance to wear, stable geometrical dimension
and superior surface finish for easy and flexible movement of window
sashes. |
